5. Close the hard drive carrier handle to lock the hard drive in place.
Install the optional front bezel.
Figure 34. Installing a hot swappable hard drive
1. release button
2. hard drive or SSD carrier
3. hard drive or SSD carrier handle
Figure 35. Installing a 1.8-inch hot swappable uSATA SSD
1. release button
2. SSD carrier
3. SSD carrier handle
Related references
Safety instructions
Related tasks
Installing a hot swappable hard drive into a hot swappable hard drive carrier
Installing the optional front bezel
Installing and removing system components
87
To Next Page
Loading...
