Dell PowerEdge XE8640 - Removing the BOSS-N1 Shroud

Figure 84. Installing the BOSS-N1 module blank
Removing the BOSS-N1 shroud
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
Steps
1. Slide the BOSS-N1 shroud towards to front of the system.
Figure 85. Removing the BOSS-N1 shroud
2. At a tilted angle, lift the BOSS-N1 shroud from the system.
Installing and removing system components
113