Dell PowerEdge XE8640 - System Health and System ID Indicator Codes

Table 62. Status LED indicators and descriptions (continued)
Icon Description Condition Corrective action
electrical error (for example,
voltage out of range, or a failed
power supply unit (PSU) or
voltage regulator).
the PSU, check the LED on the PSU. Reseat the
PSU.
If the problem persists, see the Getting help section.
Memory indicator
The indicator turns solid amber if a
memory error occurs.
Check the System Event Log or system messages
for the location of the failed memory. Reseat the
memory module.
If the problem persists, see the Getting help section.
PCIe indicator
The indicator turns solid amber if a
PCIe card experiences an error.
Restart the system. Update any required drivers for
the PCIe card. Reinstall the card.
If the problem persists, see the Getting help section.
NOTE: For more information about the
supported PCIe cards, see the Expansion cards
and expansion card risers > Expansion card
installation guidelines section.
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of the system.
Figure 122. System health and system ID indicator
148
System diagnostics and indicator codes