AH500 Programming Manual
2-84
SR40~SR161
SR40: The maximum number of error logs which are stored in SR40 is 20. Every error log
occupies 6 registers.
SR41: The error log pointer points to the latest error log. When an error occurs, the value of
the error log pointer increases by one. The range of pointer values is 0~19. For
example, the error log pointer points to the fourth error log when the value in SR41 is
3.
The time when the errors occur and the positions where the errors occur are recorded in
SR42~SR161. The corresponding functions of these data registers are as follows.
Number
Rack Slot
ID
Time when the error occurs
1
High byte
Low byte
SR43 SR44
High byte
Low byte
High byte
Low byte
High byte
Low byte
2
SR49 SR50
3
SR55 SR56
4
SR61 SR62
5
High byte
Low byte
SR67 SR68
High byte
Low byte
High byte
Low byte
High byte
Low byte
6
SR73 SR74
7
SR79 SR80
8
SR85 SR86
9
High byte
Low byte
SR91 SR92
High byte
Low byte
High byte
Low byte
High byte
Low byte
10
SR97 SR98
11
SR103 SR104
12
SR109 SR110
13
High byte
Low byte
SR115 SR116
High byte
Low byte
High byte
Low byte
High byte
Low byte
14
High byte
Low byte
SR121 SR122
High byte
Low byte
High byte
Low byte
High byte
Low byte
15
SR127 SR128
16
SR133 SR134
17
High byte
Low byte
SR139 SR140
High byte
Low byte
High byte
Low byte
High byte
Low byte
18
SR145 SR146
19
SR151 SR152
20
SR157 SR158
7. The download log in the PLC
SR227~SR308
SR227: The maximum number of download logs which are stored in SR227 is 20. Every
download log occupies 4 registers. The download actions which are recorded are
numbered, as shown in the following table.
Downloading the setting of the PLC
Downloading the module table