AH500 Programming Manual
2-92
Item
Function
trigger
When the trigger is enabled and the mail has been sent, the flag is ON.
server
response
When the trigger is enabled and there is an SMTP server response timeout, the flag
is ON.
server
response
When the trigger is enabled and there is an SMTP server response error, the flag is
ON.
A
size error
When the trigger is enabled and the size of the attachment exceeds the limit, the flag
is ON.
N
attachment
When the trigger is enabled and the attachment is not found, the flag is ON.
Please refer to section 12.2 in AH500 Operation Manual for more information about the LED
indicators and the error codes.
15. Setting the TCP/UDP socket
SR1118-SR1320
The TCP/UDP sockets are set in SR1118-SR1320, and eight TCP/UDP sockets at most can
be set. Users can set the sockets which uses the TCP protocol to execute the data
exchange in SR1118~SR1221.
Number
1 2 3 4 5 6 7 8
communic
SR1118 SR1131 SR1144 SR1157 SR1170 SR1183 SR1196 SR1209
address
(high word)
SR1119 SR1132 SR1145 SR1158 SR1171 SR1184 SR1197 SR1210
address
SR1120 SR1133 SR1146 SR1159 SR1172 SR1185 SR1198 SR1211
Remote
communication
port
SR1121 SR1134 SR1147 SR1160 SR1173 SR1186 SR1199 SR1212
data length
SR1122 SR1135 SR1148 SR1161 SR1174 SR1187 SR1200 SR1213
data address
SR1123 SR1136 SR1149 SR1162 SR1175 SR1188 SR1201 SR1214
data address
(low word)
SR1124 SR1137 SR1150 SR1163 SR1176 SR1189 SR1202 SR1215
length
SR1125 SR1138 SR1151 SR1164 SR1177 SR1190 SR1203 SR1216
address
SR1126 SR1139 SR1152 SR1165 SR1178 SR1191 SR1204 SR1217
address
(low word)
SR1127 SR1140 SR1153 SR1166 SR1179 SR1192 SR1205 SR1218
connection
SR1128 SR1141 SR1154 SR1167 SR1180 SR1193 SR1206 SR1219
SR1129 SR1142 SR1155 SR1168 SR1181 SR1194 SR1207 SR1220
SR1130 SR1143 SR1156 SR1169 SR1182 SR1195 SR1208 SR1221