Chapter 6 Applied Instruction
6-407
API
Instruction code Operand Function
1805 RSTEF
S
Resetting the abnormal AC motor drives
Device
X Y M S T C HC D L SM SR E PR K
16#
“$” DF
Pulse instruction
16-bit instruction (3 steps)
32-bit instruction
- AH500 -
Symbol:
S
：
Unit address Word
Explanation:
1. The operand S should be within the range between 0 and 255. If the station address is 0, it
indicates that the PLC broadcasts to all AC motor drives.
Example: COM2 (RS-485)
The PLC is connected to the VFD series AC motor drive (ASCII mode: SM210 and SM212 are OFF.).
If the communication timeout occurs, the PLC retries the sending of the command.
To Next Page
Loading...
