Chapter 6 Applied Instructions
6-497
Additional remark:
1. If the value in S
1
exceeds the range of values which can be represented by the floating-point
numbers, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2013.
2. If the value in S
2
exceeds the range, the instruction is not executed, SM0 is ON, and the error
code in SR0 is 16#2003.
3. If the operand D used during the execution of the 32-bit instruction is declared in ISPSoft, the
data type will be ARRAY [5] of WORD/INT.
To Next Page
Loading...
