Delta AH500 - Page 730

Chapter 7 Error Codes
7-11
Error code Description
CPU
Status
LED indicator
status
ERROR
BUS
FAULT
16#7410
The function code in a reply command is
incorrect.
Continue Keep Keep
16#7412
Owing to the fact that SW1 is ON, data can
not be downloaded to the CPU module.
Continue Keep Keep
16#757D
The remaining number of PLC password
guesses is 0.
Continue Keep Keep
16#757E
The PLC password entered is incorrect.
Continue
Keep
Keep
16#8105
The program downloaded to the CPU module
is incorrect. The syntax downloaded is
incorrect.
Continue Keep Keep
16#8106
The program downloaded is incorrect. The
length of the machine code exceeds the limit.
Continue Keep Keep
16#8107
The program downloaded is incorrect. The
length of the source code exceeds the limit.
Continue Keep Keep
16#8230
A CPU parameter downloaded is incorrect.
The IP address is illegal.
Continue Keep Keep
16#8231
A CPU parameter downloaded is incorrect.
The netmask address is illegal.
Continue Keep Keep
16#8232
A CPU parameter downloaded is incorrect.
The gateway address is illegal.
Continue Keep Keep
16#8233
A CPU parameter downloaded is incorrect.
The IP address filter is set incorrectly.
Continue Keep Keep
16#8235
A CPU parameter downloaded is incorrect.
The static ARP table is set incorrectly.
Continue Keep Keep
16#8236
A CPU parameter downloaded is incorrect.
The NTP client service is set incorrectly.
Continue Keep Keep
16#8239
A CPU parameter downloaded is incorrect.
The email sending function is set incorrectly.
Continue Keep Keep
16#823A
A CPU parameter downloaded is incorrect.
The condition for the sending of an email is
set incorrectly.
Continue Keep Keep
16#823B
A CPU parameter downloaded is incorrect. A
TCP socket is set incorrectly.
Continue Keep Keep
16#823C
A CPU parameter downloaded is incorrect. A
UDP socket is set incorrectly.
Continue Keep Keep
16#823E
A CPU parameter downloaded is incorrect.
The eeb function is set incorrectly.
Continue Keep Keep
16#8240
A CPU parameter downloaded is incorrect.
The data exchange by means of Ethernet is
set incorrectly
Continue Keep Keep
16#8241
The setting of a DNS server is incorrect.
Continue
Keep
Keep
16#8522
A module configuration is being scanned.
Continue
Keep
Keep
16#853B
An I/O module is not configured.
Continue
Keep
Keep
16#853C
An I/O module does not exist.
Continue
Keep
Keep
16#854B
An I/O module is not configured.
Continue
Keep
Keep
16#854C
An I/O module does not exist.
Continue
Keep
Keep
16#8572
The checksum of the module configuration
table is incorrect.
Continue Keep Keep
16#8576
The checksum of the module parameter
setting is incorrect.
Continue Keep Keep
16#857A
The checksum of the module parameter
mapping table is incorrect.
Continue Keep Keep
16#85E1
An I/O interrupt number is incorrect.
Continue
Keep
Keep
16#85E2
An I/O interrupt service routine does not exist.
Continue
Keep
Keep