Delta AH500 - Page 732

Chapter 7 Error Codes
7-13
Error code Description
CPU
Status
LED indicator
status
ERROR
BUS
FAULT
16#9A10
The setting of the data exchange for slave 16
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A11
The setting of the data exchange for slave 17
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A12
The setting of the data exchange for slave 18
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A13
The setting of the data exchange for slave 19
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A14
The setting of the data exchange for slave 20
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A15
The setting of the data exchange for slave 21
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A16
The setting of the data exchange for slave 22
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A17
The setting of the data exchange for slave 23
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A18
The setting of the data exchange for slave 24
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A19
The setting of the data exchange for slave 25
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A1A
The setting of the data exchange for slave 26
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A1B
The setting of the data exchange for slave 27
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A1C
The setting of the data exchange for slave 28
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A1D
The setting of the data exchange for slave 29
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A1E
The setting of the data exchange for slave 30
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A1F
The setting of the data exchange for slave 31
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep
16#9A20
The setting of the data exchange for slave 32
in the PLC Link / COM1 MODBUS is incorrect.
(SM1590)
Continue
Keep Keep