Delta AH500 - Page 738

Chapter 7 Error Codes
7-19
Error code Description
CPU
Status
LED indicator
status
ERROR
BUS
FAULT
16#9B4E
There is no response when COM2 is
connected to slave 14 by means of MODBUS.
Continue Keep Keep
16#9B4F
There is no response when COM2 is
connected to slave 15 by means of MODBUS.
Continue Keep Keep
16#9B50
There is no response when COM2 is
connected to slave 16 by means of MODBUS.
Continue Keep Keep
16#9B51
There is no response when COM2 is
connected to slave 17 by means of MODBUS.
Continue Keep Keep
16#9B52
There is no response when COM2 is
connected to slave 18 by means of MODBUS.
Continue Keep Keep
16#9B53
There is no response when COM2 is
connected to slave 19 by means of MODBUS.
Continue Keep Keep
16#9B54
There is no response when COM2 is
connected to slave 20 by means of MODBUS.
Continue Keep Keep
16#9B55
There is no response when COM2 is
connected to slave 21 by means of MODBUS.
Continue Keep Keep
16#9B56
There is no response when COM2 is
connected to slave 22 by means of MODBUS.
Continue Keep Keep
16#9B57
There is no response when COM2 is
connected to slave 23 by means of MODBUS.
Continue Keep Keep
16#9B58
There is no response when COM2 is
connected to slave 24 by means of MODBUS.
Continue Keep Keep
16#9B59
There is no response when COM2 is
connected to slave 25 by means of MODBUS.
Continue Keep Keep
16#9B5A
There is no response when COM2 is
connected to slave 26 by means of MODBUS.
Continue Keep Keep
16#9B5B
There is no response when COM2 is
connected to slave 27 by means of MODBUS.
Continue Keep Keep
16#9B5C
There is no response when COM2 is
connected to slave 28 by means of MODBUS.
Continue Keep Keep
16#9B5D
There is no response when COM2 is
connected to slave 29 by means of MODBUS.
Continue Keep Keep
16#9B5E
There is no response when COM2 is
connected to slave 30 by means of MODBUS.
Continue Keep Keep
16#9B5F
There is no response when COM2 is
connected to slave 31 by means of MODBUS.
Continue Keep Keep
16#9B60
There is no response when COM2 is
connected to slave 32 by means of MODBUS.
Continue Keep Keep
16#B100
Connection in use or duplicate forward open
Continue
Keep
Keep
16#B106
Ownership conflict
Continue
Keep
Keep
16#B110
Target for connection not configured
Continue
Keep
Keep
16#B111
RPI not supported
Continue
Keep
Keep
16#B113
Out of Connections
Continue
Keep
Keep
16#B119
Non-Listen only connection not opened
Continue
Keep
Keep
16#B127
Invalid Originator to Target Size
Continue
Keep
Keep
16#B128
Invalid Target to Originator Size
Continue
Keep
Keep
16#B129
Invalid Configuration path
Continue
Keep
Keep
16#B12D
Consuming symbol does not exist
Continue
Keep
Keep
16#B12E
Producing symbol does not exist
Continue
Keep
Keep
16#B203
The connection timeout
Continue
Keep
Keep
16#B204
Unconnected request timed out
Continue
Keep
Keep
16#B302
Network bandwidth (PPS) not available for
data
Continue Keep Keep