7-6
Modulon DPH Series
y Power On
When the ON/ OFF button is gray (
), it indicates that the UPS’s inverter is in the OFF
status. Press the button once and a reminder window will pop up shown below asking for
confirmation of ‘POWER ON’.
After selecting ‘Yes’, the ON/ OFF button will turn green (
), indicating that the power-
on process is completed.
Bypass
MEASUREMENT
Power Flow
UPS-1.1 SETUP MAINTENANCE EVENT LOGLOG IN
Administrator
POWER ON ?
No
Yes
10:15
May 25,2018
(Figure 7-6: Power On Reminder Window)
y Power Off
When the ON/ OFF button is green (
), it indicates that the UPS’s inverter is in the
ON status. Press the button once and a reminder window will pop up shown below asking
for confirmation of ‘POWER OFF’.
After selecting ‘Yes’, the ON/ OFF button will turn gray (
), indicating that the power-
off process is completed.
On-Line
MEASUREMENT
Power Flow
UPS-1.1 SETUP MAINTENANCE EVENT LOGLOG IN
Administrator
POWER OFF ?
Transfer to Bypass without Protection!
No
Yes
10:15
May 25,2018
(Figure 7-7: Power Off Reminder Window)