Delta Modulon DPH series - IP Setting

7-33
7
ௐ
ௐ
LCD Display & Settings
Item Sub Item Description
DUST
FILTER
Dust Filter
Installation
If you have installed any dust filter, please select
‘Enable’; if not, please select ‘Disable’.
Dust Filter
Installation Date
Set up the dust filter installation date.
127(௓Only when you select ‘Enable’ for
‘Dust Filter Installation’ can you set up the
‘Dust Filter Installation Date’.
Dust Filter
Replacement Date
Set up the dust filter replacement date.
When the date is due, the red warning icon (
)
will automatically appear in the upper right corner
of the LCD, and the alarm message ‘Replace Dust
Filter’ will be displayed.
127(௓Only when you select ‘Enable’ for
‘Dust Filter Installation’ can you set up the
‘Dust Filter Replacement Date’.
7.10.8 IP Setting
Path:
SETUP
ĺ,36HWWLQJ
After entering the IP SETTING screen (shown in the figure below), the following items can
be set up. These settings must be carried out by qualified service personnel. Please contact
Delta customer service for assistance.
Bypass
172.16.176.200
172.16.190.64
172.16.0.1
255.255.254.0
delta.corp
172.16.191.254
DELTA
UPS-1.1
SETUP MAINTENANCE EVENT LOGLOG IN
Administrator
MEASUREMENT
IP Setting
IP SETTING
DHCP Client
IP Address Subnet Mask Gateway IP
DNS 1 IP DNS 2 IP Search Domain Host Name
Enable
10:15
May 25,2018