Delta Modulon DPH series - Page 76

4-14
Modulon DPH Series
No. Item Description
1
RESET Press the RESET button once to restart the LCD.
2
MODBUS
(Built-in MODUBS card)
1. Lets the UPS have MODBUS communication
function.
2. Connects to a user-supplied monitoring system.
3
BMS
Connects to a user-supplied battery management
system or Delta battery management system
(optional).
4
DISPLAY
1. Connects to the display port shown in Figure 4-3.
2. Before shipment, the display port has been
connected to the 10” touch panel with the
designated cable in Delta factory.
5
EMS/ CONSOLE
Connects to a user-supplied environmental monitoring
system or Delta EnviroProbe 1000/ 1100/ 1200
(optional).
6
(USB Ports)
There are two USB ports. Connect a user-supplied
USB flash drive to any of the USB ports to (1) upgrade
the UPS and LCD’s firmware and (2) download event
logs.
7
(Built-in SNMP card)
1. Lets the UPS have network communication function.
2. Connects to a user-supplied monitoring system.