Delta Ultron Series User Manual

133
7.6.7 General Setting
Path: → General Setting
Item Sub Item Description
DATE/
TIME
Date Format Select the date format.
Date Set up the date.
Time Set up the time.
SCREEN
Screen Brightness Adjust the LCD display brightness (default: 80).
Screen Sleep (after)
Set up the LCD backlight sleep time (default: 1
minute).
USER
Language Set up the display language (default: English).
Admin Password Set up the administrator password (4 digits).
MODBUS ID
Set up the MODBUS ID for the MODBUS port located
at the rear of the touch panel.
Baud Rate
Set up the baud rate for the MODBUS port located at
the rear of the touch panel.
On/ Off Button
Access
Set up the access for the
ON/ OFF Button
() as
'
Any User
' or '
Administrator Only
'.
DUST
FILTER
Dust Filter
Installation
If you have installed any dust filter, please select
'
Enable
'; if not, please select '
Disable
'.
Dust Filter
Installation Date
Set up the dust filter installation date.
NOTE:
Only when you select '
Enable
' for '
Dust
Filter Installation
' can you set up the item.
Dust Filter
Replacement Date
Set up the dust filter replacement date.
When the date is due, the red warning icon ( ) will
automatically appear in the upper right corner of the
LCD, and the alarm message '
Replace Dust Filter
'
will be displayed.
NOTE:
Only when you select '
Enable
' for '
Dust
Filter Installation
' can you set up the item.

Delta Ultron Series Specifications

General

Brand	Delta
Model	Ultron Series
Category	UPS
Language	English