ENGLISH
When.
connecting with
an
HpMIIDVI converter cable
(adapter)'
• HDMI video signals
are
theoretically compatible with the
DVI
format.
When connecting to a monitor, etc., equipped with a
DVI-D
connector, connection
is
possible using
an
HDMI/DVI converter cable, but depending
on
the combination of components
in
some cases the video
signals will not
be
output.
• When connecting using
an
HDMI/DVI converter adapter, the video signals may not
be
output properly
due to poor connections with the connected cable, etc.
-kl.Ji.
• Use a CPPM-compatible
DVD
player to play DVD-Audio discs that are copyright-protected
by
CPPM.
• The
AVR-1908
cannot
be
controlled from another device
via
the HDMI cable.
• The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.)
may
be
restricted
by
the connected device.
• Video signals
are
not output properly when using devices that
are
not HDCP-compatible.
• Video signals
are
not output if the input video signals do not match the monitor's resolution.
In
this case,
switch the
DVD
player's resolution to a resolution with which the monitor is compatible.
·If
the menu "Manual Setup" -
"HDMI
Setup" setting (ll2.!rpage
25)
is
set to "AMP'; the sound may
be
interrupted when the monitor's power
is
turned off.
• Use a cable
on
which the
HDMIIogo
is indicated
(a
certified HDMI product) for connection to the HDMI
connector. Normal playback may not be possible when using a cable other than one on which the HDMI
logo
is
indicated
(a
non-HDMI-certified product).
• If the monitor or
DVD
player does not support deep color, deep color signal transfer
is
not possible.
• If the monitor or
DVD
player does not support
xvYCC,
xvYCC
signal transfer
is
not possible.
•
• When the
AVR-1908
and
DVD
player are connected using
an
HDMI cable, also connect the
AVR-1908
and
monitor using
an
HDMI cable.
• If the connected monitor or
DVD
player only
has
a
DVI-D
connector, use
an
HDMI/DVI converter cable.
When using a
DVI
cable,
no
audio signals
are
transmitted.
• Use a Deep Color compatible cable for connection to Deep Color compatible devices.
2-channel linear
2ch
32-192
kHz
CD,
DVD-Video,
PCM
16/20/24 bits DVD-Audio
Multi-channel
8ch 32-192
kHz
DVD-Audio
linear
PCM
16/20/24 bits
Dolby Digital,
DTS
Bitstream DVD-Video
In
order to play the digital video
and
audio signals of a
DVD-
Video or DVD-Audio disc using HDMI/DVI connections, both
the connected
DVD
player
and
monitor must
be
equipped
for a copyright protection system called "HDCP" (High-
bandwidth Digital Content Protection).
HDCP
is
a copy protection technology consisting of data
encoding
and
mutual identification
of
the devices.
The
AVR-1908
is
HDCP-compatible.
For
details
on
the
DVD
player or monitor you
are
using, refer to its operating
instructions.
*
The
AVR-1908
is
equipped for HDMI version
1.3a.
This
version
is
compatible with other versions, allowing
connection to
all
components equipped with
an
HDMI
connector.
*
The
AVR-1908
is
compatible with
30-
and
36-bit Deep
Color.
[
~D._
J
[Jonitor
HOMI
HOMI
OUT
IN
lEV
lEV
~ ~
Connecting Equipment
with
HOMI
connectors
With HDMI connections, the video and audio signals
can
be
transferred
with
a single cable.
."
or
<
a-
ll>
"
""
I
:;l
o
c:
a-
~
.
o
So
•
By
default, the HDMI audio signals are output from the speakers connected to the
AVR-1908
.
.g.
·To
output the sound from the
TV,
make the settings at menu "Manual Setup" - "HDMI Setup" - "TV"
(ll2.!rpage
25).
11
To Next Page
Loading...
Need help?
General
