Denon AVR-1908 Owner's Manual

ENGLISH
[POWER OFF] i8 t [POWER ON]
[SOURCE SELECn -r~§.§.fl.L [VOLUME +1-)
[CHANNEL +H I f('):'S: r-lL [MUTE]
[T~NG~) ~~lfF [SHIFT)
[ [~n~).[.l I~--?~~.--: JI [RANDOM)
[REPEAn J)'----_->o
_Off
Power off
_011
Power on
SOlIIICE SELECT
Switching the input lone
--+/-
Volume control
atAME.+/-
Channel + 1-
-+/-
Tuning t /-
..m
Muting
SIWT
Switching the memory block
--
Aula search (cuel
-
Stop
~I
Play I Pause
IEPEAT
I·track I All -track repeat play
-
1-1rack I album shuffle play
CD
No setting
OVDNQP
TAPEJC().AJMD
iPod/NE"f'INOR K
PunchThrough Function
• Pundt Through' is a function allowing you to operate .. , _, II,
_,_, _ and _ on CD, iPodlNETWORK. TAPE/CD-RlMD,
DIIDNDP or VCR OOfllIlOIl'l"ts When in the SAT/CABLE or lV
mode. BV defau~, nothing is set.
VCR
2
Set [MODE SELECTOR 2) to the component to be
registered (SAT/CABLE or TV).
3
Press [MEMORY) and [RETURN) at the same time.
The indicator starts flashing,
1Set [MODE SELECTOR 1) to "VIDEO",
4 Input the number of the component you want to set.
sz-;-, [RETURN)
[MODE [MODE
SELECTOR 1)--,011;1.. ,,~ SELECTOR 2)
lFrontl
(Rearl
I
[MEMORY] -H) G-;- [RETURN)
*When using a Control Dock for iPod (ASD-l RI, the (FAVORITES
DIRECT PLAY] bunon cannot be used.
51

Denon AVR-1908 Specifications

General

Channels	7.1
Power Output	90W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Inputs	2
HDMI Outputs	1
Dolby Digital	Yes
DTS	Yes
Type	AV Receiver
Component Video Inputs	3
Component Video Outputs	1
Digital Audio Inputs	2 Optical, 2 Coaxial
Tuner	AM/FM
Frequency Response	10Hz-100kHz (+1, -3dB)
Input Sensitivity/Impedance	200mV/47k ohms
Signal-to-Noise Ratio	98 dB
Power Consumption	460W
Surround Sound Formats	Dolby Digital, DTS
Total Harmonic Distortion	0.08%
Tuner Frequency Range	AM: 522-1611 kHz, FM: 87.5-108.0 MHz
Standby Power Consumption	Less than 1W