ENGLISH
Select the on-screen display's display mode.
Master volume display during adjustment.
Show display for
10
seconds after operation.
Turn
display off.
Show display for
10
seconds after operation.
Turn
display off.
10see
OFF
1
Osee
OFF
Display
Mode
This sets the time the on-screen display
is
displayed when
an
operation
is
performed.
iPod Information
MasterVolume
Tuner Information
This sets the time the on-screen display
is
displayed when
an
operation
is
performed.
[Selectable items]
ON
I:
Turn
display
on.
OFF
:
Turn
display off.
[Selectable items]
Always
Show display continuously.
I
30sec
I:
Show display for 30 seconds after operation.
[Selectable items]
I
Mode1
I:
If there
is
no
video signal, flickering of the on-screen
display
is
not prevented.
Mode2
:Prevents flickering of the on-screen display when there
is
no
video signal.
Use
this mode if the on-screen display does not appear
in
the Mode
1,
as
may happen according to the
TV
being
used.
[Selectable items]
Always
Show display continuously.
I
30sec
I:
Show display for 30 seconds after operation.
OFF
:
Turn
the screensaver function off.
I • On-Screen Display
Make on-screen display related settings.
ON
:Activate the screensaver if there
is
no
activity for about 3
minutes.
[Selectable items]
~:
Use this source.
Delete
Do
not use this source.
II
Source Delete
Remove input sources that are not used from the display.
Screensaver
-Neii4
• Input sources being used
in
the various zones cannot
be
deleted.
• Input sources set to "Delete" cannot
be
selected using the
SOURCE
SELECT
knob on the main unit or
SOURCE
SELECT
button
on
the remote
control unit.
Make screensaver settings.
Use
the screensaver to prevent burn-in on the monitor screen.
When set to "ON
';
the screensaver
is
activated if there
is
no
activity
for about 3 minutes.
[Selectable items]
Text
Input source and mode display.
[Selectable items]
ON
I:
Turn
display on.
OFF
:
Turn
display off.
-80dB
-
+18dB
Set the volume level when the power
is
turned
on
in
units of 1
dB.
Make a setting for maximum volume.
Volume Limit
II
Volume Control
Set the main zone volume setting.
[Selectable items]
~:
Do not set a maximum volume.
-2OdB
Set the maximum volume to
-20
dB.
-1l1dB
Set the maximum volume to
-10
dB.
lIdB
Set the maximum volume to 0
dB.
This sets the volume set when the main zone's power
is
turned
on.
Power On Level
[Selectable items]
Last
I:
Use
the memorized setting from the last session.
Always use the muting
on
condition when power
is
turned on.
Mute
Level
This sets the amount of attenuation of the volume when the mute
mode is set
in
the main zone.
[Selectable items]
~:
The sound
is
cut off entirely.
-40dB
The
sound
is
attenuated
by
40
dB.
-20dB
The
sound
is
attenuated
by
20 dB.
•
29
To Next Page
Loading...
Need help?
General
