Denon AVR-1908 - I Amp Assign I; Multi-Zone Settings with the Amp Assign Function

ENGLISH
! (f)
I 2
I -c
Amp Assign mode:
-+ ZONE2 (Default)
ZONE2
SL 51ch SR +
~IJ) M>
~ Main zone --..,
The AVR-1908 is compatible with the following types of playback:
• Multi-zone playback (ZONE2)
• Bi-amp playback (front speakers)
-NeJ ••
• For bi-amp playback, use speakers compatible with that type of connection.
• When conducting bi-amp playback, remove the short-circuiting boards (or wires) from the speaker
terminals.
Multi-zone Settings with the Amp Assign Function
The amp assign function lets you assign the amplifiers for the different channels built into the AVR-1908 to
the speaker outputs for the different lones.
Select the desired playback environment from
among" Setting 1" to" Setting 4': then set the corresponding
"Amp Assign" mode at menu "Manual Setup" - "Option Setup" - "Amp Assign"
(Grpage 28).
Connect the speakers as described at "Amp Assign" mode settings and speakers connected to the various
speaker terminals.
o Amp Assign mode setting and speakers connected to the various speaker
terminals
::S::I
SURR
SURR. BACK/
FRONT
AMP ASSIGN
CENTER
Amp Assign mode
R
1
L
R
I
L R
I
L
ZONE2
FR
I
FL C
SR
I
SL
Z2R
I
Z2L
I ~
I 3
I ~
o
"
[
"Setting 3" is possible to switch the Amp Assign mode between the 5.1-channel mode and 2-channel
mode without changing the speaker connections.