Denon AVR-1908 Owner's Manual

ENGLISH
s
c:
~
N
o
::l
..
"'C
ill
<
cr
.,
I ~
r--;;--
I ..
: 3
I ~
I ..
, (")
o
~
£.
OUT
l R
GG
IN
l R
GG
CD recorder /
MD recorder /
Tape deck
--AUDIO--
AUDtO
- - - -I~===:;:===~::::::::=;:==
Make analog connections if you wish to record analog audio signals, or digital connections if you wish to
record digital audio signals, depending on the types of connectors on the components being used.
--AUDIO--
AUOlO
_ IN
l R
~G
Video cassette recorder
---- VIDEO ----
•
Connecting the Recording Components
Carefully check the left (Ll and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.
Connect the cables to be used.
;,
• When recording via the AVR-1908, the playback device's cable must be of the same type as the cable
used to connect the AVR-1908's VCR OUT connector.
Example: TV IN ~ S-Video cable: VCR OUT ~ S-Video cable
TV IN ~ Video cable: VCR OUT ~ Video cable
• When using a component video cable for the video connection, make the settings at menu" Input Setup"
- "Assign" - "Component In" ((jT'page 33).
14

Denon AVR-1908 Specifications

General

Channels	7.1
Power Output	90W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Inputs	2
HDMI Outputs	1
Dolby Digital	Yes
DTS	Yes
Type	AV Receiver
Component Video Inputs	3
Component Video Outputs	1
Digital Audio Inputs	2 Optical, 2 Coaxial
Tuner	AM/FM
Frequency Response	10Hz-100kHz (+1, -3dB)
Input Sensitivity/Impedance	200mV/47k ohms
Signal-to-Noise Ratio	98 dB
Power Consumption	460W
Surround Sound Formats	Dolby Digital, DTS
Total Harmonic Distortion	0.08%
Tuner Frequency Range	AM: 522-1611 kHz, FM: 87.5-108.0 MHz
Standby Power Consumption	Less than 1W