Denon AVR-1908 Owner's Manual

ENGLISH
Parameter
~1. Surround Parameter
2. Tone Control
3. Room EQ
4. RESTORER
5. Night Mode
6.Audio Delay
• Surround Parameter
Adjust surround sound parameters.
The adjustable parameters differ for the different surround modes
(Ej'"page 59, 60).
MODE
CINEMA
EQ
Soften the treble range of movie soundtracks for better
understanding.
[Selectable items]
ON CINEMA EO is used.
~: CINEMA EO is not used.
D.COMP
Compress dynamic range (difference between loud and soft sounds).
[Selectable items]
~: Turn dynamic range compression off.
LOW Low setting.
MID Middle setting.
HIGH High setting.
'?#'
When playing DTS sources, this is only displayed for compatible
software.
PANORAMA
Assign front UR signal also to surround channels, for wider sound.
If the surround effect seems weak,
set" PANORAMA:' to "ON':
[Selectable items] ON ~
DIMENSION
Shift sound image center to front or rear, to adjust playback balance.
[Variable range] 0 - [!] - 6
CENTER WIDTH
Assign center channel signal to front left and right channels for wider
sound.
[Variable range] 0 - [!] - 7
DELAYTIME
Adjust delay time to control sound stage size.
[Variable range] 0 ms - 130 ins I- 300 ms
EFFECT LEVEL
•
·CINEMA : Surround sound mode optimized for movie sources.
, MUSIC Surround sound mode optimized for music sources.
GAME Surround sound mode optimized for games.
PL Dolby Pro Logic playback mode.
#..
Set to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
Select the mode according to the playback source.
o In the PLllx or PLll mode
[Selectable items] CINEMA MUSIC GAME
*: Can be selected in the PLll mode.
o In the DTS NEO:6 mode
[Selectable items] CINEMA MUSIC
PL
*
LFE
Adjust the low-frequency effects level (LFE).
[Variable range] -1OdB - 1 OdB 1
:#~
For proper playback of the different program sources, we recommend
setting
to the values below.
• Dolby Digital sources:
"0 dB"
•
DTS movie sources: "0 dB"
•
DTS music sources: "-10 dB"
CENTER IMAGE
Assign center channel signal to front left and right channels for wider
sound.
[Variable range] 0.0 - ~ - 1.0
Adjust effect signal level.
[Variable range]
- [ill - 15
The MUSIC mode is also effective for movie sources including a lot of
stereo music.
36

Denon AVR-1908 Specifications

General

Channels	7.1
Power Output	90W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Inputs	2
HDMI Outputs	1
Dolby Digital	Yes
DTS	Yes
Type	AV Receiver
Component Video Inputs	3
Component Video Outputs	1
Digital Audio Inputs	2 Optical, 2 Coaxial
Tuner	AM/FM
Frequency Response	10Hz-100kHz (+1, -3dB)
Input Sensitivity/Impedance	200mV/47k ohms
Signal-to-Noise Ratio	98 dB
Power Consumption	460W
Surround Sound Formats	Dolby Digital, DTS
Total Harmonic Distortion	0.08%
Tuner Frequency Range	AM: 522-1611 kHz, FM: 87.5-108.0 MHz
Standby Power Consumption	Less than 1W