Denon AVR-1908 Owner's Manual

ENGLISH
I ~
u
("l
I g
I ~.
~
<
a-
ll>
"
""
• When "Setup Lock" is set to "ON'; the settings listed below can
no longer be changed. Also, "SETUP LOCKED!" is displayed if you
attempt to operate related buttons.
· Menu operations
· RESTORER
· Night Mode
· Parameter
· Room EO
· Channel Level
· Audio Delay
• To cancel the setting, press the MENU button to re-display the" Setup
Lock" screen, then change the setting to "OFF';
[Selectable items]
· ''Olle : Turn protection on.
I::. I: Turn protection off.
•
Normal display brightness.
Reduced display brightness.
: Very low display brightness.
: Display is off unless controls are operated.
[Selectable items] r "'f:1~J' _ ~C\"
-N·n8
When using the AVR-1908 with only the included remote control unit
(RC-1077l, there is no need to make settings.
Operating from the main unit and main remote
control
unit
Press the DIMMER button.
~ Bright -- Dim ~
~ OFF _ Dark -------J

Denon AVR-1908 Specifications

General

Channels	7.1
Power Output	90W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Inputs	2
HDMI Outputs	1
Dolby Digital	Yes
DTS	Yes
Type	AV Receiver
Component Video Inputs	3
Component Video Outputs	1
Digital Audio Inputs	2 Optical, 2 Coaxial
Tuner	AM/FM
Frequency Response	10Hz-100kHz (+1, -3dB)
Input Sensitivity/Impedance	200mV/47k ohms
Signal-to-Noise Ratio	98 dB
Power Consumption	460W
Surround Sound Formats	Dolby Digital, DTS
Total Harmonic Distortion	0.08%
Tuner Frequency Range	AM: 522-1611 kHz, FM: 87.5-108.0 MHz
Standby Power Consumption	Less than 1W