ENGLISH FRANCAIS
o SAFETY PRECAUTIONS
SAFETY INSTRUCTIONS
13.
Power-Cord Protection - Power-supply cords should be routed
so
that they
are not likely
to
be walked on or pinched by items placed upon or against
them, paying particular attention
to
cords at plugs, convenience receptacles,
and the point where they exit
from
the product.
14.
Outdoor Antenna Grounding - If
an
outside antenna or cable system
is
connected
to
the product, be sure the antenna or cable system is grounded
so
as
to provide some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides
information
with
regard
to
proper grounding
of
the mast and supporting
structure, grounding
of
the lead-in wire to
an
antenna discharge unit, size
of
grounding conductors, location
of
antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
See
Figure
A.
15.
Lightning - For added protection for this product during a lightning storm,
or
when
it
is
left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will
prevent damage
to
the product due to lightning and power-line surges.
16.
Power Lines - An outside antenna system should not
be
located
in
the
vicinity
of
overhead power lines or other electric light or power circuits, or
where
it can fall into such power lines or circuits.
When
installing
an
outside
antenna system, extreme care should be taken
to
keep from touching such
power lines or circuits
as
contact
with
them
might
be fatal.
17. Overloading - Do not overload wall outlets, extension cords,
or
integral
convenience receptacles
as
this
can
result
in
a risk of fire or electric shock.
18
Object and Liquid Entry - Never push objects of any kind into this product
through openings
as
they may touch dangerous voltage points or short-out
parts that could result
in
a fire
or
electric shock. Never spill liquid of any kind
on the product.
19. Servicing - Do not attempt to service this product yourself
as
opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer
all
servicing to qualified service personnel.
20. Damage Requiring Service - Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
al When the power-supply cord or plug
is
damaged,
b)
If liquid has been spilled, or objects have fallen into the product,
cl If the product has been exposed to rain or water,
d)
If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions
as
an
improper adjustment
of
other controls may result
in
damage and will often require extensive
work
by a qualified technician to
restore the product
to
its normal operation,
e)
If the product has been dropped or damaged
in
any
way,
and
fl
When
the product exhibits a distinct change
in
performance - this
indicates a need for service.
21. Replacement Parts - When replacement parts are required, be sure the
service technician has used replacement parts specified
by
the manufacturer
or have the same characteristics
as
the original part. Unauthorized
substitutions may result
in
fire, electric shock, or other hazards.
22.
Safety Check - Upon completion
of
any service or repairs
to
this product,
ask the service technician to perform safety checks
to
determine that the
product is
in
proper operating condition.
23. Wall or Ceiling Mounting - The product should
be
mounted to a wall or
ceiling only
as
recommended by the manufacturer.
24. Heat - The product should
be
situated away from heat sources such
as
radiators, heat registers, stoves, or other products (including amplifiers) that
produce heat.
ANTENNA
LEAD
IN
WIRE
ANTENNA
DISCHARGE
UNIT
(NEG SECTION 810-20)
2
1.
3
4.
5
6
__
POWER
SERVICE
GROUNDING
elECTRODE SYSTEM
NEG·NATIONAL
ELECTAICAl
COOE (NEG ART 250. PART
H)
ELECTRIC
~~~Y~~~N=T
--~
rr-
I
7.
8.
9
Read
Instructions - All the safety and operating instructions should
be
read
before the product
is
operated.
Retain Instructions - The safety and operating instructions should be
retained for future reference.
Heed Warnings - All warnings on the product and
in
the operating
instructions should be adhered to.
Follow Instructions - All operating and use instructions should
be
followed.
Cleaning - Unplug this product
from
the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners.
Attachments - Do not use attachments not recommended by the product
manufacturer
as
they may cause hazards.
Water and Moisture - Do not use this product near water - for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub;
in
a
wet
basement;
or near a
swimming
pool; and the like.
Accessories - Do not place this product on
an
unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury to a child or
adult, and serious damage
to
the product. Use only
with
a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold
with
the
product. Any mounting
of
the product should
follow the manufacturer's instructions, and should
use a mounting accessory recommended by the
manufacturer.
A product and cart combination should be moved
with
care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination
to
overturn.
10.
Ventilation - Slots and openings
in
the cabinet are provided for ventilation
and to ensure reliable operation
of
the product and to protect it from
overheating, and these openings
must
not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should not
be
placed
in
a built-in
installation such
as
a bookcase or rack unless proper ventilation is provided
or the manufacturer's instructions have been adhered to.
11.
Power Sources - This product should
be
operated only from the type of
power source indicated on the marking label. If you are not sure
of
the type
of power supply
to
your home, consult your product dealer or local power
company. For products intended
to
operate from battery power, or other
sources, refer to the operating instructions.
12
Grounding
or
Polarization - This product may be equipped
with
a polarized
alternating-current line plug
(a
plug having one blade wider than the other).
This plug will
f~
into the
power
outlet only one way. This
is
a safety feature.
If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail
to
fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
The lightning flash
with
arrowhead symbol, within
an
equilateral
triangle,
is
intended
to
alert the user
to
the presence of
uninsulated "dangerous voltage" within the product's enclosure
that
may be
of
sufficient magnitude to constitute a risk
of
electric
shock
to
persons.
The exclamation point
within
an
equilateral triangle is intended
to
alert the user
to
the presence
of
important operating
and maintenance (servicingl instructions
in
the literature
accompanying the appliance.
A
RISK
OF
ELECTR~C
SHOCK
A
~
'-----_-=D:.....:O"-'N:...::.O=T-=---=O-'-P=E;:...:;N_-----J
~
CAUTION:
TO
REDUCETHE RISK OF ELECTRIC SHOCK, DO
NOT
REMOVE
COVER (OR BACK).
NO
USER-SERVICEABLE PARTS INSIDE.
REFER
SERVICINGTO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT
EXPOSETHISAPPLIANCETO
RAIN OR MOISTURE.
I
To Next Page
Loading...
Need help?
General
