ENGLISH
[Audio]
Symptom
Cause
Countenneasure Page
No
sound
is
•
You
are playing
a monaural
• The mode
is
set to something
34
produced from
source
(TV,
AM
radio broadcast,
other than "STANDARD':
center speaker. etc.) in the STANDARD mode.
No
sound
•
The
surround
mode
is
set to
• Set
to a surround playback
35
is
produced "STEREO': "DIRECT" or "PURE
mode.
from surround
DIRECT'.'
speakers.
No sound
is
•
The
surround
back
speaker's
• Check the setting and change it 29
produced from
power amplifier
is
assigned to a
as
necessary.
surround back different channel.
speaker.
• Surround back speaker setting
is
• Set
to
something
other than 24
set to "None'.'
"None':
• Surround mode not set to amode
• Select
a surround playback
35
for 6.1- or
7.1-channel
playback.
mode.
No
sound
is
• Subwoofer's power not turned
•
Turn
on the subwoofer's power.
-
produced from
on.
subwoofer.
•
The
"Subwoofer"
setting
at
• Set to "Yes':
24
"Speaker Configuration"
is
set to
"No'.'
•
The
subwoofer
is
not properly
• Check the connections. 9
connected.
•
The
subwoofer's volume
is
• Adjust the subwoofer's
volume
46
turned off.
to
an
appropriate level.
No
test tones are
• Surround
mode not
set to
• Set to the STANDARD mode. 34
produced when "STANDARD':
main remote
control unit's
TEST
button is pressed.
DTS
sound
is
not
•
DVD
player's audio output setting
• Set the
DVD
player.
For
details,
-
output.
is
not set
to
bitstream.
refer
to
the
DVD
player's
operating instructions.
•
DVD
player
is
not compatible
• Use a DTS-compatible player.
-
with
DTS
sound playback.
• The AVR-1908's "Input
Mode"
• Set
to the
"Auto"
or
"OTS"
32
setting
is
set to "peM'.'
mode.
HDMI audio
•
The
"Manual Setup" -
"HDMI
• Set to "AMP'.'
25
signals are not
Setup" -
"HDMI
Audio
Out"
output from
setting
is
set to "TV'.'
speakers.
Symptom
Cause
Countenneasure Page
No sound
is
• The "Manual Setup" - "HOMI
• Set to "TV':
25
output from
Setup
"
-
"HOMI
Audio Out"
the monitor setting
is
set to "AMP'.'
connected
with
HDMI
connections.
(Video]
Symptom Cause Countenneasure Page
No picture
·The
connections between the
• Check the connections.
11
-
17
appears. AVR-1908 and monitor are faulty.
• The
monitor's input setting
is
• Set properly.
-
wrong.
•
PURE
DIRECT mode
is
set. • Cancel the
PURE
DIRECT mode. 35
•
The
player
is
connected using the • High definition (1080i/720p) and
-
component input connectors, the progressive
(480p/576pl
video
monitor
is
connected using the signals
are
not down-converted.
video (yellow)
or
S-Video output
Set
the player
to
interlace
connectors. (480i/576i) signals.
No picture
•
The
connections to the HOMI • Check the connections.
11
appears connectors are faulty.
with HOMI
• HOMI input setting
is
improper. • Check the HOMI input setting.
32
connections.
• The monitor
is
not compatible
• Connect
a
monitor that
is
11
with
copyright protection compatible
with
copyright
(HOCP)
protection
(HOCP).
•
The
HOMI format of the player • Match the HOMI format
of
the
11
and monitor do not match.
player
and
monitor.
Picture cannot be
• Input
source does not match
•
The
video conversion function
14
recorded. recorder's video connection
does not
work
for the
REC
connector (video or S-Video).
OUT
connectors. Match the
input source and
recorder
connections.
OVDs
cannot be
• This
is
not a malfunction.
Most
-
copied
on
a
VCR.
movie software includes copy
-
prevention signals and cannot be
copied.
66
s
~
N
C
::l
'"
To Next Page
Loading...
