Denon AVR-4306 User Manual

Advanced Operation
51
Advanced Operation
Remote control unit
Operating DENON audio components
AMP/LAST
MODE
SELECTOR
1
Press the MODE SELECTOR buttons to select the
component you want to operate.
• The icon for the selected mode flashes.
This function switches as shown below each time one of
the AMP button is pressed.
: AMP, ZONE2, ZONE3 or SYSTEM CALL
: TUNER
: DIGITAL TUNER
:SATELLITE or CABLE
:CDor CDR
: DVD or DVDR
: VCR or TAPE
:TV
Example:
Select “AMP” mode.
Select “ZONE2” mode.
Select “ZONE3” mode.
Select “SYSTEM CALL” mode.
2
Operate the audio component.
For details, refer to the component’s operating instructions.
It may not be possible to operate some models.
• When a remote control code is sent, the icon for the mode of
the device to which that code belongs flashes.
• When the AMP/LAST button is pressed, it is possible to switch
between the AMP mode (AMP, ZONE2, ZONE3 or SYSTEM
CALL) and the last selected non-amplifier universal mode (TU,
DTU, SAT/CBL, CD, DVD, VCR or TV).
Default state is to toggle AMP to SAT/CBL mode.

Denon AVR-4306 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	102 dB
Dynamic power per channel (4 Ohm)	220 W
Dynamic power per channel (8 Ohm)	150 W
Power output per channel (1KHz@6 Ohm)	170 W
Power output per channel (20-20KHz@8 Ohm)	130 W
HDMI in	3
Line-in	Yes
Composite video in	7
USB ports quantity	1
Digital audio coaxial in	2
Digital audio optical in	5
Headphone connectivity	3.5 mm
Speakers connectivity type	RCA
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	570 W
3D	-
Optical drive included	No
Product color	Silver
Audio decoders	DTS 96/24, DTS Neo:6, DTS-ES, Dolby Digital, Dolby Digital EX, Dolby Pro Logic IIx
Apple docking compatibility	iPod

Weight and Dimensions

Depth	429 mm
Width	434 mm
Height	171 mm
Weight	18500 g