Denon AVR-4306 User Manual

35
Basic Operation Basic Operation
DTS NEO:6 mode
Surround playback can be performed for the analog input and
digital input 2-channel signals.
1
Press the STANDARD button to select “DTS
NEO:6” mode.
3
Press the SURROUND PARAMETER button.
• The surround parameter menu is displayed.
2
Play a program source.
4
Press the CURSOR
FF
or
GG
button to select the
play mode.
The mode switches as shown below each time the
STANDARD button is pressed.
DTS NEO:6DOLBY PLIIx
5
Press the CURSOR
DD
or
HH
button to select the
various surround parameters.
6
Press the CURSOR
FF
or
GG
button to adjust the
parameters setting.
7
Press the ENTER or SURROUND PARAMETER
button to complete the setting.
• When “Default” is selected and the CURSOR
FF
button is
pressed, “MODE” and “TONE” are automatically reset to the
default values and “CINEMA EQ.” is set to “OFF”.
• When playing PCM digital signals or analog signals in the
DOLBY PRO LOGICII, DOLBY PRO LOGICIIx, DTS NEO:6
modes and the input signal switches to a digital signal encoded
in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal,
the mode automatically switches to DTS surround.
2 Surround parameters e
DTS NEO:6 Mode:
• Cinema:
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as with
6.1-channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and the
reversed phase component to the surround (SL, SR and SB
channels).
• Music:
This mode is suited mainly for playing music. The front channel
(FL and FR) signals bypass the decoder and are played directly
so there is no loss of sound quality, and the effect of the
surround signals output from the center (C) and surround (SL,
SR and SB) channels add a natural sense of expansion to the
sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been
added.
CURSOR USER MODE
STANDARD ENTER
SURROUND PARAMETER
ENTER
USER MODE
CURSOR
SURROUND
PARAMETER
STANDARD

Denon AVR-4306 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	102 dB
Dynamic power per channel (4 Ohm)	220 W
Dynamic power per channel (8 Ohm)	150 W
Power output per channel (1KHz@6 Ohm)	170 W
Power output per channel (20-20KHz@8 Ohm)	130 W
HDMI in	3
Line-in	Yes
Composite video in	7
USB ports quantity	1
Digital audio coaxial in	2
Digital audio optical in	5
Headphone connectivity	3.5 mm
Speakers connectivity type	RCA
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	570 W
3D	-
Optical drive included	No
Product color	Silver
Audio decoders	DTS 96/24, DTS Neo:6, DTS-ES, Dolby Digital, Dolby Digital EX, Dolby Pro Logic IIx
Apple docking compatibility	iPod

Weight and Dimensions

Depth	429 mm
Width	434 mm
Height	171 mm
Weight	18500 g