Denon AVR-4306 User Manual

31
Basic Operation Basic Operation
NIGHT CURSOR
STANDARD ENTER
SURROUND PARAMETER
Dolby Digital mode and DTS Surround (only
with digital input)
2
Play a program source with the
, mark.
• The Dolby Digital indicator lights when
playing Dolby Digital sources.
• The DTS indicator lights when playing DTS
sources.
lights
lights
lights
3
Press the SURROUND PARAMETER button.
• The surround parameter menu is displayed.
4
Press the CURSOR
DD
or
HH
button to select the
parameter.
5
Press the CURSOR
FF
or
GG
button to select the
setting.
6
Press the ENTER or SURROUND PARAMETER
button to complete the setting.
1
Press the STANDARD button to select
“STANDARD (Dolby/DTS Surround)” mode.
• When “Default” is selected and the CURSOR
FF
button is
pressed, “CINEMA EQ.” and “D.COMP.” are automatically
turned off, “LFE” is reset, and “TONE” is set to the default
value.
ENTER
CURSOR
NIGHT
SURROUND
PARAMETER
ON SCREEN
STANDARD
2 Dialogue Normalization
The dialogue normalization function is activated automatically
when playing Dolby Digital program sources.
Dialogue normalization is a basic function of Dolby Digital which
automatically normalizes the dialog level (standard level) of the
signals which are recorded at different levels for different
program sources, such as DVD, DTV and other future formats
that will use Dolby Digital.
When this function is activated, the following message appears
on the main unit’s display:
Display
Offset -4dB
Dial.Norm
The number indicates the normalization level when the currently
playing program is normalized to the standard level.
• Canceling night mode:
Press the NIGHT button again.
• The night mode only works when playing program sources
recorded in Dolby Digital.
• When the night mode is set to “ON”, the “D.COMP” surround
parameter can not be selected.
When listening at night or at lower volumes, the night mode
improves listenability.
Press the NIGHT button to enter the night mode.
• The NIGHT indicator lights.
Night mode
Set to “1spkr” Set to “2spkrs”
lights
The surround back channel can be switched on and off from
the surround parameter menu.
When the surround back channel is set to “ON”, the
surround back channel’s output display lights.

Denon AVR-4306 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	102 dB
Dynamic power per channel (4 Ohm)	220 W
Dynamic power per channel (8 Ohm)	150 W
Power output per channel (1KHz@6 Ohm)	170 W
Power output per channel (20-20KHz@8 Ohm)	130 W
HDMI in	3
Line-in	Yes
Composite video in	7
USB ports quantity	1
Digital audio coaxial in	2
Digital audio optical in	5
Headphone connectivity	3.5 mm
Speakers connectivity type	RCA
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	570 W
3D	-
Optical drive included	No
Product color	Silver
Audio decoders	DTS 96/24, DTS Neo:6, DTS-ES, Dolby Digital, Dolby Digital EX, Dolby Pro Logic IIx
Apple docking compatibility	iPod

Weight and Dimensions

Depth	429 mm
Width	434 mm
Height	171 mm
Weight	18500 g