45
Basic Operation Basic Operation
Listening to music
1
Press the CURSOR
DD
or
HH
button to select the
music file you want to play, then press the ENTER
or CURSOR
GG
button.
•Press the CURSOR
FF
button to return to the music menu
screen.
2
Press the ENTER or CURSOR
GG
button.
• Playback starts.
Manual search:
Press and hold in the CURSOR
DD
or
HH
button during playback.
•
DD
: Fast reverse
•
HH
: Fast forward
Track search:
Press the CURSOR
DD
or
HH
button during playback.
•
DD
: Move to beginning of previous track
•
HH
: Move to beginning of next track
Repeat play:
Press the TU (TUNER) button, then press the MODE button.
The mode switches as follows each time the MODE button is
pressed.
• RPT One: Single track repeat
• RPT ALL: All track repeat
Shuffle play:
Press the TU (TUNER) button, then press the MEMORY button.
The mode switches as follows each time the MEMORY button
is pressed.
• SFL Songs : Single track shuffle
• SFL Albums: Album shuffle
Pause:
Press the ENTER button during playback.
Press again to resume.
Stop:
Press the ENTER button for at least 2 seconds during playback.
The mode switches between the Browse mode and the
Remote mode if the MODE button is pressed for at least 2
seconds after pressing the TU (TUNER) button.
In the Remote mode, only the CURSOR buttons and the
ENTER button can be used.
• When the STATUS button is pressed during playback, the front
panel display switches between the title name, artist name and
album name.
• The iPod’s backlight turns on when the CURSOR
FF
button is
pressed for more than two seconds while in the Remote mode.
When the backlight is on, it can be turned off by pressing the
CURSOR
FF
button for more than two seconds.
• Depending on the iPod’s software version, it may not be
possible to operate the iPod from the AVR-4306. Use the latest
version of the software. Information on the latest version of the
software can be obtained on the Apple Computer website.
• If you do not want the OSD to be displayed while playing the
iPod, set “Function/Mode Status” at “Setting the On Screen
Display” to “OFF” ( page 73).
•With the AVR-4306 it is possible to display folder names and file
names on the screen like titles. The AVR-4306 can display up to
64 characters, consisting of numbers, capital letters and small
letters. A “?” mark is displayed in place of non-compatible
characters.
Viewing still pictures (only for iPods equipped
with the slideshow function)
1
Press the TU (TUNER) button, then press the
MODE button for at least 2 seconds to switch
from the Browse mode to the Remote mode.
• “Remote iPod” is displayed on the AVR-4306’s display.
2
Watching the iPod’s screen, press the CURSOR
DD
or
HH
button to select “Photos”, then press the
ENTER or CURSOR
GG
button.
• The iPod’s photo data is displayed on the TV monitor.
Use this procedure to view photo data stored on the iPod on a TV
monitor.
Disconnecting the iPod
We recommend either pressing the ON/STANDBY
button to set the AVR-4306’s power to the standby
mode, or turning the FUNCTION knob on the AVR-
4306 or pressing the FUNCTION button on the
remote control unit to set the input source to
something other than “AUX/iPod”.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
