Why is no sound produced from surround back speaker on my Denon AVR-4311CI?
Check if “Amp Assign” is set appropriately to output audio from the surround back speakers. Set “Speaker Config.” – “Surround Back” on the menu to something other than “None”. Also, set “Surround Parameters” – “Surround Back” on the menu to something other than “OFF”. Ensure the surround mode is not set to “STEREO”.
Why is DTS sound not output on my Denon AVR-4311CI Stereo Receiver?
Set “Decode Mode” on the menu to “Auto” or “DTS.”
Why is no audio output with HDMI connection on my Denon AVR-4311CI Stereo Receiver?
Check the connection of the HDMI connectors. To output HDMI audio from the speakers, set “HDMI Audio Out” on the menu to “AMP”. To output HDMI audio from a TV, set “HDMI Audio Out” on the menu to “TV.”
Why is no sound produced from my Denon Stereo Receiver's subwoofer?
If no sound is coming from the subwoofer, check the subwoofer connections and ensure the subwoofer is powered on. In the menu, set “Speaker Config.” – “Subwoofer” to “1spkr” or “2spkrs”. If “Front” and “Center” for “Speaker Config.” are set to “Large”, and “Subwoofer Mode” is set to “LFE”, no sound may be output from the subwoofers, depending on the input signal or selected surround mode.
What to do if Dolby TrueHD, DTS- HD, Dolby Digital Plus audio is not output on Denon Stereo Receiver?
Make HDMI connections to enable Dolby TrueHD, DTS-HD, and Dolby Digital Plus audio output.
General| Channels | 9.2 |
|---|---|
| HDMI Outputs | 2 |
| Network Connectivity | Ethernet, Wi-Fi |
| Response Bandwidth | 10 Hz - 100 kHz |
| Signal-To-Noise Ratio | 102 dB |
| THD | 0.05 % |
| Total Harmonic Distortion | 0.05 % |
| Input Impedance | 47 kOhms |
| Input Sensitivity | 200 mV |
| Tuner Type | AM/FM |
| Tuner Bands | AM, FM |
| Preset Station Qty | 40 |
| HDMI Switching | Yes |
| 3D Technology | Yes |
| DLNA | Yes |
| USB Port | 1 |
| Frequency Response | 10 Hz - 100 kHz |
| Audio Formats Supported | AAC, MP3, WMA, WAV, FLAC |
| Dimensions (W x H x D) | 17.1 x 7.6 x 17.1 inches |
| Dimensions | 17.1 in x 7.7 in x 16.7 in |
| Weight | 38.1 lbs |
| Internet Streaming Services | vTuner |
| Connectivity | Ethernet, Wi-Fi, Bluetooth |
| Video Inputs | 6 HDMI, 3 component, 4 composite |
| Video Outputs | component video, composite video, HDMI |
| Supported Video Formats | 1080p |
| Network Connectivity (Optional) | Wi-Fi |
| Power Output (Detailed) | 140W per channel (8 ohms, 20Hz-20kHz, 0.05% THD), 190W per channel (6 ohms, 1kHz, 0.7% THD) |
| Audio Inputs | 7 |
Provides precautions for installing the unit to ensure proper heat dissipation.
Explains the entire setup procedure, from unboxing to home theater use.
Details connecting various media and external devices.
Explains basic playback operations and input source selection.
Guides on selecting surround modes for multi-channel or stereo playback.
Covers installation, connection, and setup for advanced speaker systems.
Explains advanced playback functions like HDMI control and speaker volume.
Provides a menu map for detailed settings and configuration options.
Explains how to operate other devices using the remote control unit.
Identifies and explains the functions of the front panel parts.
Lists additional information such as trademarks and explanations of terms.
Lists common symptoms and their causes/solutions for common problems.
Provides technical specifications for the unit and accessories.
To Next Page
