Denso BHT-1600 - Page 164

152
BHT-1600 Handy Terminal User Manual
Verify Check Digit Selects whether to verify the Modulo 43 check digit. If the
check digit is incorrect, the barcode will not be accepted.
Enable
Transmit Check Digit
Decide whether to include the check digit in the data to
transmit.
 “Verify Check Digit” must be enabled.
Disable
Support Full ASCII
Selects whether to enable Code 39 Full ASCII decoding.
Characters are paired to encode the full ASCII characte
r
set.
Disable
Length option Sets the length of the Code 39 symbols to decode.
 One Fixed length (Length 1)
 Two Fixed lengths (Length 1>Length 2)
 Max / Min Length (range: 0-55; Length 1<Length 2)
 Any Length
Max / Min
Length
(4-55)
CODE 93
Code 93 Enable
Code 93 Switch to enable Code 93 decoding. Enable
Length option Sets the length of the Code 93 symbols to decode.
 One Fixed length (Length 1)
 Two Fixed lengths (Length 1>Length 2)
 Max / Min Length (range: 0-55; Length 1<Length 2)
 Any Length
Max /
Min
Length
(4-55)
CODE 128
Code 128 Enable
Code 128 Switch to enable Code 128 decoding. Enable
GS1-128 Enable
GS1-128
 Switch to enable GS1-128 decoding.
Enable
Separator Character

Enable the function code character separator, which is
used to separate data fields of variable length and
application identifiers of subsequent data fields in
concatenated data strings. Choose your input method
from drop-list: Keyboard input,
Keyboard input
(Hexadecimal) or Symbol table input to set
a
separator character to replace with.
None