Denso BHT-1600 - Page 165

153
BHT-1600 Handy Terminal User Manual
Enable App ID
Separator

Check to enable the separator configuration for
Application Identifier.
 You can respectively set the Left Separator
and
Right Separator
. Choose your input method from
drop-down list: Keyboard input,
Keyboard input
(Hexadecimal) or Symbol table input
to set a
separator character to replace with.
Disable
ISBT-128 Disable
ISBT 128 Switch to enable ISBT 128 decoding. Disable
Concatenation Sets whether to enable decoding ISBT-
128 by
performing concatenation of ISBT data
 Disable: Does not perform concatenation
 Enable: Performs concatenation on all ISBT-
128
barcodes.
 Auto-discriminate: Auto-
discriminates between the
ISBT-128 ba
rcodes which require concatenation and
those which do not need concatenation.

Auto-discrimi
nate
Redundancy When “Auto-
discriminate” is applied, decide the number
of times of supplementary decoding the same barcode to
count as a valid read. Configurable between 2 and 20
10
CODE 2 OF 5