Derby cycle Impulse Evo - Page 193

EN-86 Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4
9.3.2 Inserting and locking the battery
IMPORTANT
Graspthebatteryrmly, so that it does not fall out of your hand. It
can be damaged if you drop it.
One-key system: The same key (if available) can be used for
the cycle and battery lock.
Seat tube battery: Impulse Evo pedelec
1. Hold the battery, with the discharger
connector pointing downwards, at an
angleof80˚,slightlytiltedtotheleft
in front of the docking station.
2. Place the battery catches into the dents
provided.
For 1.
Hold in front of the docking station
Battery nib
and recesses
For 2. Battery nibs into recesses
3. Push the battery forwards and upwards
into the docking station until the
locking mechanism engages.
4. Remove the battery key from the lock.
The battery is now locked.
For 3.
Push battery into docking station
For 4.
Locking the battery