Configuring the PC Software Setting up NET CAPI
162
the item Options from the Edit menu. In the Lines tab you then select the
system telephone from the Phone calls list.
3. Enter a telephone number in the Number box and confirm with Dial. Under
Windows 2000/XP you first click on the Dial icon and in the subsequent dia-
logue activate Phone call.
4. The number you entered is displayed on the selected system telephone. Lift
the receiver to start dialling.
Note: This note is not relevant to Windows 2000/XP. If the
“Phone Dialer” program is not installed, you will have to in-
stall it. To do this, you open the Control Panel and click on
Software. In the Windows Setup tab you activate the Con-
nections component.
16.3 Setting up NET CAPI
With a CAPI driver (common application programming interface) Windows pro-
grammes are able to access services and functions of an ISDN card. With a
network-based CAPI, the OpenCom 100 allows the use of ISDN functions also by
PCs in which no ISDN card is integrated.
Requirements
You require an active IP network connection between the PC and the telephone
system.
Please note: Before installing the CAPI driver for the OpenCom 100, any
existent ISDN card must be removed and any CAPI drivers on
your PC must be de-installed.
Installing the NET CAPI driver
1. Call up the start mask from the product CD (see Configuring the PC Software on
page 158).
2. Select Software: NET CAPI Driver from the start mask and follow the program
instructions.
To Next Page
Loading...
