Configuration Guide
169
17. Configuration Guide
The Configuration Guide contains a series of flowcharts that will help you to plan
the configuration of the OpenCom 100 and guide you through the necessary set-
tings step by step, focusing on the network settings. The individual charts are sum-
marised below:
■ Overview: This chart gives you an overview of the initial configuration of the
OpenCom 100.
■ Configuring PBX Ports: This chart shows you the necessary steps for confi-
guring ports and terminals.
■ Configuring Easy Access: This chart guides you through TCP/IP settings for
the OpenCom 100.
■ Configuring ISP Settings: These instructions support you in configuring the
Internet access.
■ Configuring RAS Settings: This chart guides you through the configuration of
the RAS settings.
■ Configuring LAN-to-LAN Settings: This chart guides you through the confi-
guration of the LAN-to-LAN settings.
■ Configuring E-Mail: This diagram tells you how to create the requirements
needed for configuring the OpenCom 100 e-mail access function.
■ Configuring E-Mail Access: This overview provides instructions on confi-
guring the OpenCom 100 e-mail access server.
To Next Page
Loading...
