Factory Settings on Delivery Internet Functions
20
■ Users can use the OpenCTI 50 to send short messages to other users.
■ Every user can change the configuration of the OpenCom 100.
■ Every user can create a personal telephone book and edit entries in the central
telephone book.
■ Every user can read out the charges.
■ Applications requiring a license (e.g. OpenCount) can be used after being acti-
vated.
■ Access via RAS is not allowed.
■ E-mail notification to system terminals is possible. There are no user accounts
configured for the sending of e-mails, the authorisation for sending e-mails is
not deactivated.
■ The multi-company variant is not activated.
2.3 Internet Functions
■ RAS access (with or without callback) can be set up for every OpenCom 100
user. RAS access requires activation of the RAS authorisation.
■ More than one mail account query can be set up for every user.
■ Every user with a system terminal can be informed automatically of the receipt
of e-mails.
■ Users can disconnect existing Internet connections (via the OpenCom 100 Web
console and from a system terminal if the function has been configured on that
terminal).
The following IP addresses are preset for the network configuration:
■ Host name: host
■ IP address: 192.168.99.254
■ Network mask: 255.255.255.0
To Next Page
Loading...
