Mounting the OpenCom 150 Rack InfoCom System Scope of Delivery
72
An overview of the interface cards can be found under the heading OpenCom 150
(5 Slots) starting on page 43.
For each of the five slots, there is a LED on the front panel of the OpenCom 150.
These LEDs are labelled SLOT1..SLOT5. An LED will show a constant light, if an
interface card is inserted into the corresponding slot and the operating software
has detected an interface card. An LED will blink, if an error condition was
detected.
6.4 Scope of Delivery
■ One communications system OpenCom 150 Rack
■ One AC adapter with connection cable
■ One set of short user guides
■ One CD
Note: Note for the DeTeWe installer: Please download and
install the latest released software from our Web site/part-
nership area.
SUBSCRIBER 1..8
(Slot 4 & 5)
4 x a/b a/b1 ... a/b4
8 x a/b a/b1 ... a/b8
AT 1..4 (Slot 3, 4 & 5) M100-AT4 a/b1 ... a/b4
Label Interface Card Ports
To Next Page
Loading...
