Configuration Examples OpenCom 100 in Computer Networks
87
8. Configuration Examples
8.1 OpenCom 100 in Computer Networks
One of the outstanding features of the OpenCom 100 is the integration of tele-
phony and computer networks. Connect the OpenCom 100 via a computer
network (LAN) with suitably configured workstations, and you can use its network
features from these workstations. Using a Web browser you can access:
■ the OpenCom 100 Configurator
■ call charge administration
■ the OpenCTI 50, with which telephone functions can be used on a PC
■ the OpenCom 100 central telephone book and your personal telephone book
as well as to the company telephone book (if the multi-company variant is acti-
vated).
In addition, the OpenCom 100 can be used as an Internet access server. RAS access
can also be implemented using the OpenCom 100, which enables the integration
of external staff in the LAN.
In this chapter you will find several examples of configurations showing inte-
gration of the OpenCom 100 in a LAN. Which example applies to your situation
depends on the size and properties of the existing or planned LAN infrastructure.
Note: Several menu entries mentioned in this chapter are
available only, if you switch on the Level: Expert in the top
level dialogue of the Configurator.
To Next Page
Loading...
