Factory Settings on Delivery Authorisations
19
■ Connections can be parked.
■ Call protection can be activated, call-waiting protection, announcement pro-
tection and pick-up protection can not be activated.
■ Transmission of one’s own phone number (MSN or system access number) can
be suppressed on a per-call basis.
■ The telephone lock can be activated. The terminal PIN is “0000”.
■ Interception of “malicious” callers is possible if this feature has been ordered
from the network operator.
■ The white list, black list and call filters are not preconfigured and thus not
active. If these lists are configured, they can be activated for the user groups. A
special list with emergency telephone numbers is preset and activated.
■ Call lists on terminals list internal calls, external calls, calls from the door and
calls that the user received while they were telephoning.
■ Function keys can be programmed on system telephones, no keys are locked.
■ The evaluation of connection data by external cost-recording programs is
deactivated.
■ The cost multiplier is set to 100%, i.e. the costs are not multiplied by any factor.
There are no preset basic amounts for the charging of calls.
■ Speed dialling is possible if this has been configured in the OpenCom 100
central telephone book.
■ Keypad dialling can be used.
■ The door opener can be activated from all terminals. Door calls can be for-
warded.
■ Time control is not active as there are no time groups configured.
■ Call diversion for SMS calls in the fixed-line network is not activated.
■ Calls can be marked with a booking number for the purpose of project based
accounting.
To Next Page
Loading...
