DS2460Q QAM Analysis Meter Operation Manual
62
5dB and 10dB.
AUTO: In Figure 4-44, press
(AUTO) soft key to
adjust reference level and scale quickly .The meter will
automatically adjust them to most optimal state.
(
):Press this button to next page as Figure
4-45, the user can press this button again to return.
Figure 4-45
SAVE: Press
button and enter into Figure
4-79to save the result of tilt test ,refer to4.21.2.
STOP(
): Press STOP soft key, the scanning will
stop, and you can continue the scanning by pressing it
again.