Handheld Cable/Antenna Analyzer
2-13 Data Entry
Parameter Setting
You can set parameters with the numeric keys, the arrow keys, or the rotary knob. It is simple to change
the parameters quickly with the arrow keys. You can edit a parameter continuously with the rotary knob.
Edit in position displayed
On a measurement display, many parameters are listed in place. You can move the highlight cursor at
the place where a parameter appears, and press the Enter key to set it. The numeric keys, arrow keys,
and rotary knob can be used to modify the parameter. Press Enter again to exit.
Submenu Entry
Upon pressing the corresponding submenu key, the parameter will appear on the upper left corner of the
display. You can set the parameter using the numeric keys, arrow keys, or the rotary knob, and press Enter
to exit the editor.
Text Entry
When saving a measurement, setup, or image file, you must create a filename. Use the numeric keypad
to enter letters and numbers.
Changing Date and Time
To change the date and time to your desired format, press the
System
(#8) key on the numeric keypad.
This opens the System submenu, allowing you to change the date and time. Touch “Date & Time” to the
left of the display; then use the touch keyboard, including the delete/back-arrow key, to set the correct
date and time.
2-14 Making a Measurement
The E7000L SitePROFILER devices perform various cable & antenna measurements and power meter tests
designed to simplify the installation, maintenance and troubleshooting of a wireless networking
communication system.
Additional Measurement Options
The base platform of the E7000L includes the Cable & Antenna measurement mode. Other tools can be
added as software-enabled measurement options. Examples follow; see Section 1-3 for a complete list.
•
RF Power Meter: includes Internal Power Meter and Inline High Power Meter.
•
Optical feedline measurements: includes Optical Power Meter, Visual Fault Locator (VFL), and
Fiber Inspection.
Additional measurement options can be added at the time of purchase, or at a later date as your test
needs evolve.
To Next Page
Loading...
Need help?
General
