Handheld Cable/Antenna Analyzer
2-16 About the Soft Carrying Case
The E7000L can be operated while in the soft carrying case. On the back of the case is a large storage
pouch for accessories and power supply.
Instrument Inserted into the Soft Carrying Case
To place the instrument into the soft carrying case:
1.
Place the soft carrying case face-down on a stable surface, with the front panel closed and lying flat.
NOTE: The soft case has two zippers near the back. The zipper closest to the front of the case
opens, enabling you to install and remove the instrument. The zipper located toward the back of
the case opens an adjustable support panel that can be used to provide support for improved
stability and air flow while the instrument is in the case. This support panel also contains the
storage pouch.
2.
Open the zippered back of the case.
3.
Insert the instrument face-down into the case. Take care that the connectors fit properly through the
opening in the case top.
To Next Page
Loading...
Need help?
General
