Handheld Cable/Antenna Analyzer
4-6 Fiber Microscope Mode: Menus & Definitions
This section defines the
Fiber Microscope
measurement mode’s menu functions. Subsections 4-6.1 and 4-6.2
highlight the main menus available in this mode (
Measurement
and
Display
).
4-6.1 — Measurement Menu
The
Measurement main menu
contains a Run/Hold control for the fiber probe’s video feed.
Measure Menu
Run/Hold
: Tap to toggle.
Hold
pauses the measurement display at its current point, and
Run
unpauses it to continue the real-time measurement.
4-6.2 —Display Menu
Display Menu
Brightness
: Sets the brightness of the video feed. Use the arrow keys, rotary knob, or data keypad
to adjust the value between -10 (dimmest) and +10 (brightest), then press Enter to confirm.
Contrast
: Sets the light-dark contrast of the video feed. Use the arrow keys, rotary knob, or data
keypad to adjust the value between 0 and 20, then press Enter to confirm.
Sharpness:
Sets the sharpness of the video feed. Use the arrow keys, rotary knob, or data keypad
to adjust the value between 0 (softest) and 10 (sharpest), then press Enter to confirm.
To Next Page
Loading...
