Digi XBee Product Manual

Canada (IC)
XBee / XBee-PRO RF Modules 802.15.4 Product Manual 105
Canada (IC)
Labeling requirements
Labeling requirements for Industry Canada are similar to those of the FCC. A clearly visible label on
the outside of the final product enclosure must display the following text:
Contains Model XBee Radio, IC: R201WW07215214
Contains Model XBee-PRO Radio, IC: R201WW08215111
The integrator is responsible for its product to comply with IC ICES-003 and FCC Part 15, Sub. B -
Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry Canada accepts FCC
test report or CISPR 22 test report for compliance with ICES-003.
Japan
In order to gain approval for use in Japan, the XBee RF module or the International variant of the
XBee-PRO RF module (which has 10 dBm transmit output power) must be used.
Labeling requirements
For XBee radios, a clearly visible label on the outside of the final product enclosure must display the
following text: ID: R201WW07215214
For XBee-PRO radios, the RF power must be 10 dBm (10 mW) and a clearly visible label on the outside
of the final product enclosure must display the following text: ID: R201WW08215111
ANATEL (Brazil) certification
The XBee RF modules with 802.15.4 firmware (models noted in conformity information below)
comply with Brazil ANATEL standards in Resolution No. 506. The following information is required in
the user manual for the product containing the radio and on the product containing the radio (in
Portuguese):

Digi XBee Specifications

General

Operating Frequency	2.4 GHz
RF Data Rate	250 kbps
Model	XBee S2C
Category	Control Unit
Operating Voltage	2.1 to 3.6V DC
Operating Temperature	-40 to +85 °C
Interface	UART
Dimensions	24.38 x 27.61 x 9.14 mm