Digi XBee User Manual

API Operation Frame descriptions XBee/XBee-PRO® S2C ZigBee® RF Module 196
Status
code
Transparent
mode string Description Status data Description
0x02 Joining An association request is being made. radioChannel(1) channel number ranging from 11 to 26 (0x0B to 0x1A)
radioTxPower(1) low level signed byte value for transmit power, values
range from 0xC9 to 0x05 inclusive
panid(2) 16 bit 4med' a network, or a Router/End Device has
'joined' a network.
extendedPanId(8) 64 bit PAN Identifier for network
0x03 Joined Joined - Coordinator “Formed:”, Router/End
Device “Joined”
0x04 Beacon
Response
Data received from a neighboring node in
response to a beacon request
ZS[stackProfile](1)
See ZS (ZigBee Stack Profile).
extendedPanId(8) 64 bit PAN Identifier for network
allowingJoin(1)
0x00 - not permitting joins to its network
0x01 - permitting joins to its network
radioChannel(1) channel number ranging from 11 to 26 (0x0B to 0x1A)
panid(2) 16 bit PAN Identifier for network
rssi(1) maximum relative signal strength indicator value
measured in units of dBm
lqi link quality indicator
0x05 Reject
ZS
Not an association candidate because
ZS
does not match that given in the beacon
response.
0x06 Reject
ID Not an association candidate because
configured pan ID does not match that given
in the beacon response.
0x07 Reject
NJ
Not an association candidate because it is
not allowing joins.

Digi XBee Specifications

General

Operating Frequency	2.4 GHz
RF Data Rate	250 kbps
Model	XBee S2C
Category	Control Unit
Operating Voltage	2.1 to 3.6V DC
Operating Temperature	-40 to +85 °C
Interface	UART
Dimensions	24.38 x 27.61 x 9.14 mm