NIC Quick Reference Guide
61
3. Select the circuit pack that the license key was modified for. A on-
screen keyboard appears.
4. Enter the new license key into the text box, making sure to enter
capitalized letters.
• If using the on-screen keyboard, you will need to press the Shift
key to enter capital letters, then press the Shift key again to
enter numbers, and so on.
• However if you have an external USB keyboard available, the
License Key entry process is much easier by using the Caps
Lock feature when typing the key.
5. Select Enter when done.
6. Repeat steps 2 through 5 if updating the license key for more than
one circuit pack.
7. For the changes in the licensed options to take effect, reboot the
test set by using the Reboot button in the I/O settings.
Setting Time and Date and Time Zone
To Manually set the time:
1. Select and choose . The Miscellaneous
functions appear.
2. Select Unit Time, Date, Zone. The Date/Time and Time
Zone menu appears.
3. Select Manually Adjust Date/Time.
4. Select Time.
To Next Page
Loading...