NIC Quick Reference Guide
77
Deleting a User
1. Select and choose . The Security screen
appears.
2. From the User Name column, select the user you want to delete.
3. Select .
Establishing a Default Login
This function allows an administrator to establish a default login, which
results in the users not having to enter a user name and password each
time they use the test set.
The default login function is only applicable from the NIC unit’s loacl
GUI. When connecting to a NIC via the Remote NIC application, a user
ID and password are alsway required.
To establish a default login:
1. Select and choose . The Security screen
appears.
2. From the Users list box, select the User Name that you wish to
make the default login.
3. Select . Under the Default User column, Yes appears,
indicating that the user has been established as default user.
To disable the User Login Required:
1. Select and choose . The Misc screen appears.
2. Under Local Settings, clear the User Login Required check box.
A cleared check box indicates that the User Login Required is
disabled, and the unit will not prompt for a password on boot up.
3. Reboot the test set by selecting , and choose .
4. Select . The Reboot the Unit dialog box appears.
To Next Page
Loading...