Digital Lightwave NIC - Updating User Profiles

Document No. CO 004844K
76
3. Under Account Information, select next to the User Name
field. A keypad appears.
4. Enter the User Name.
5. Select next to the Password field. A keypad appears.
6. Enter a Password.
7. Select next to the Permissions field. The Select User
Permissions window appears.
8. Select one of the following user permissions:
– Read: Allows the user read-only privileges.
– Read/Write: Allows the user to read and update information.
– Calibrate: Allows the user read and write privileges and the
ability to perform calibration procedures on the unit.
– Admin: Allows the user to perform network administrator
tasks such as calibrating, adding, deleting, and updating user
profiles.
9. Select . The new user profile is added and appears on
the User List.
Updating a User Profile
1. Select and choose . The Security screen
appears.
2. From the User list, select the user profile to be updated. The user
name, password, and permissions appears in the Account box.
3. Select next to the field to be updated.
 If Password was selected a keypad appears allowing you to
modify the current information. Press Enter when you are
done.
 If Permissions was selected, the Select User Permissions win-
dow appears. Select the updated permissions that you wish to
apply.
4. When you are done updating the user's profile, select Update.
The updated information appears on the User List.