Digital Lightwave NIC - Security System Lock Management

NIC Quick Reference Guide
79
Enabling/Disabling Security System Lock
This function allows an administrator to enable a Security System Lock
that only allows one user with Read and Write permissions (this
includes Calibration and Admin users) to be logged in at a time. If a user
with Read and Write permissions is already logged in, a window will
appear giving you the option of logging in with Read-Only permissions
only. When the user logs in with Read-Only permissions, all functional-
ity will be disabled with the exception of the online help and the About
this product function.
To enable Security System Lock:
1. Select and choose . The Security screen
appears.
2. From Default Entry, select the Security System Lock check
box. A checked box indicates that the Security System Lock
function is enabled.
To disable Security System Lock:
1. Select and choose . The Security screen
appears.
2. From Default Entry, clear the Security System Lock check box.
The cleared check box indicates that the Security System Lock
function is disabled.