C1G +8"4(/&(H+/6*+?."@* )/".!
!
!
!
There are several methods for mounting the projector. Depending on your chosen installation, one method may be
more suitable than another.
Floor Mounting (Upright)
In typical front and rear screen installations, the projector can be mounted to a secure and level surface such as a
table or cart. Carts are useful when moving a projector during a presentation or from site to site. If possible, lock the
wheels when it’s in position to prevent it from being moved during a presentation.
Adjusting the Projection Angle
If the screen is significantly higher or lower than the projector, you can also tilt the projector at a slight angle. In a ceil-
ing installation, you do this by adjusting the ceiling mount.
For a floor installation, turn the adjustable feet at the bottom of the projector to adjust the projection angle.
If you do this, you may need to vertically shift the image to compensate. For detailed instructions, refer to Lens
Adjustments on page 30.
To Next Page
Loading...
Need help?
General
