C1J + 54.(&(H+"( +/6*+?"K*.!
!
!
!
1. Turn on your source components.
2. Press the ON button on the remote control to turn on the projector. The LED flashes green to indicate that
it is warming up.
3. When the projector is ready for use, the LED turns off.
C1L +!6' (H&(H+/6*+MF:+N'(H 4'H*
!
!
!
!
When you turn on the projector for the first time, the OSD Language Menu appears.
The projector can display the menus in English, French, German, Italian, Spanish, Swedish, Traditional Chinese,
Simplified Chinese, Japanese, Korean, Portuguese or Russian.
Press or to select a language. Then, press ENTER to confirm your selection.
To Next Page
Loading...
