Digital Projection M-Vision

To Next Page

To Previous Page

OPERATION

Auto Power On:Setting Auto Power On to On causes the projector to automatically power up when AC power is

present. If the projector is plugged into a switched AC outlet, this allows the projector to be turned on using a wall

switch instead of the remote control unit. If you do not need this capability, set Auto Power On to Off (this is the default

setting).

Rear Projection: This control reverses all images and menus, and is necessary when the projector is used in rear-pro-

jection applications. The default is Off.

Control

Select Control from the Main Menu to set various options related to control of the projector.

1 Key / 2 Key / 3 Key / 4 Key / 5 Key: These menu items assign the function of the keys numbered 1 through 5 on the

remote.

There are eight sources corresponding to the eight connections to the projector. When you assign a source to a num-

Digital Projection M-Vision - Control